GeneratedMesh

Create a line, square, or cube mesh with uniformly spaced or biased elements.

Description

The GeneratedMesh object is the built-in mesh generation capable of creating lines, rectangles, and rectangular prisms ("boxes"). The mesh automatically creates side sets that are logically named and numbered as follows:

In 1D, left = 0, right = 1
In 2D, bottom = 0, right = 1, top = 2, left = 3
In 3D, back = 0, bottom = 1, right = 2, top = 3, left = 4, front = 5

The length, width, and height of the domain, as well as the number of elements in each direction can be specified independently.

Example Syntax

[Mesh]
  type = GeneratedMesh
  dim = 2
  nx = 30
  ny = 30
  xmax = 2
  ymax = 2
[]

Input Parameters

dimThe dimension of the mesh to be generated
C++ Type:MooseEnum
Unit:(no unit assumed)
Options:1, 2, 3
Controllable:No
Description:The dimension of the mesh to be generated

Required Parameters

add_sideset_idsThe listed sideset ids will be assumed valid for the mesh. This permits setting up boundary restrictions for sidesets initially containing no sides. Names for this sidesets may be provided using add_sideset_names. In this case this list and add_sideset_names must contain the same number of items.
C++ Type:std::vector<short>
Unit:(no unit assumed)
Controllable:No
Description:The listed sideset ids will be assumed valid for the mesh. This permits setting up boundary restrictions for sidesets initially containing no sides. Names for this sidesets may be provided using add_sideset_names. In this case this list and add_sideset_names must contain the same number of items.
add_sideset_namesThe listed sideset names will be assumed valid for the mesh. This permits setting up boundary restrictions for sidesets initially containing no sides. Ids for this sidesets may be provided using add_sideset_ids. In this case this list and add_sideset_ids must contain the same number of items.
C++ Type:std::vector<BoundaryName>
Unit:(no unit assumed)
Controllable:No
Description:The listed sideset names will be assumed valid for the mesh. This permits setting up boundary restrictions for sidesets initially containing no sides. Ids for this sidesets may be provided using add_sideset_ids. In this case this list and add_sideset_ids must contain the same number of items.
add_subdomain_idsThe listed subdomain ids will be assumed valid for the mesh. This permits setting up subdomain restrictions for subdomains initially containing no elements, which can occur, for example, in additive manufacturing simulations which dynamically add and remove elements. Names for this subdomains may be provided using add_subdomain_names. In this case this list and add_subdomain_names must contain the same number of items.
C++ Type:std::vector<unsigned short>
Unit:(no unit assumed)
Controllable:No
Description:The listed subdomain ids will be assumed valid for the mesh. This permits setting up subdomain restrictions for subdomains initially containing no elements, which can occur, for example, in additive manufacturing simulations which dynamically add and remove elements. Names for this subdomains may be provided using add_subdomain_names. In this case this list and add_subdomain_names must contain the same number of items.
add_subdomain_namesThe listed subdomain names will be assumed valid for the mesh. This permits setting up subdomain restrictions for subdomains initially containing no elements, which can occur, for example, in additive manufacturing simulations which dynamically add and remove elements. IDs for this subdomains may be provided using add_subdomain_ids. Otherwise IDs are automatically assigned. In case add_subdomain_ids is set too, both lists must contain the same number of items.
C++ Type:std::vector<SubdomainName>
Unit:(no unit assumed)
Controllable:No
Description:The listed subdomain names will be assumed valid for the mesh. This permits setting up subdomain restrictions for subdomains initially containing no elements, which can occur, for example, in additive manufacturing simulations which dynamically add and remove elements. IDs for this subdomains may be provided using add_subdomain_ids. Otherwise IDs are automatically assigned. In case add_subdomain_ids is set too, both lists must contain the same number of items.
allow_renumberingTrueIf allow_renumbering=false, node and element numbers are kept fixed until deletion
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:If allow_renumbering=false, node and element numbers are kept fixed until deletion
bias_x1The amount by which to grow (or shrink) the cells in the x-direction.
Default:1
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The amount by which to grow (or shrink) the cells in the x-direction.
bias_y1The amount by which to grow (or shrink) the cells in the y-direction.
Default:1
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The amount by which to grow (or shrink) the cells in the y-direction.
bias_z1The amount by which to grow (or shrink) the cells in the z-direction.
Default:1
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The amount by which to grow (or shrink) the cells in the z-direction.
build_all_side_lowerd_meshFalseTrue to build the lower-dimensional mesh for all sides.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:True to build the lower-dimensional mesh for all sides.
coord_blockBlock IDs for the coordinate systems. If this parameter is specified, then it must encompass all the subdomains on the mesh.
C++ Type:std::vector<SubdomainName>
Unit:(no unit assumed)
Controllable:No
Description:Block IDs for the coordinate systems. If this parameter is specified, then it must encompass all the subdomains on the mesh.
elem_typeThe type of element from libMesh to generate (default: linear element for requested dimension)
C++ Type:MooseEnum
Unit:(no unit assumed)
Options:EDGE, EDGE2, EDGE3, EDGE4, QUAD, QUAD4, QUAD8, QUAD9, TRI, TRI3, TRI6, TRI7, HEX, HEX8, HEX20, HEX27, TET, TET4, TET10, TET14, PRISM, PRISM6, PRISM15, PRISM18, PYRAMID, PYRAMID5, PYRAMID13, PYRAMID14
Controllable:No
Description:The type of element from libMesh to generate (default: linear element for requested dimension)
gauss_lobatto_gridFalseGrade mesh into boundaries according to Gauss-Lobatto quadrature spacing.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Grade mesh into boundaries according to Gauss-Lobatto quadrature spacing.
ghosting_patch_sizeThe number of nearest neighbors considered for ghosting purposes when 'iteration' patch update strategy is used. Default is 5 * patch_size.
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:The number of nearest neighbors considered for ghosting purposes when 'iteration' patch update strategy is used. Default is 5 * patch_size.
max_leaf_size10The maximum number of points in each leaf of the KDTree used in the nearest neighbor search. As the leaf size becomes larger,KDTree construction becomes faster but the nearest neighbor searchbecomes slower.
Default:10
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:The maximum number of points in each leaf of the KDTree used in the nearest neighbor search. As the leaf size becomes larger,KDTree construction becomes faster but the nearest neighbor searchbecomes slower.
nx1Number of elements in the X direction
Default:1
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:Number of elements in the X direction
ny1Number of elements in the Y direction
Default:1
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:Number of elements in the Y direction
nz1Number of elements in the Z direction
Default:1
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:Number of elements in the Z direction
parallel_typeDEFAULTDEFAULT: Use libMesh::ReplicatedMesh unless --distributed-mesh is specified on the command line REPLICATED: Always use libMesh::ReplicatedMesh DISTRIBUTED: Always use libMesh::DistributedMesh
Default:DEFAULT
C++ Type:MooseEnum
Unit:(no unit assumed)
Options:DEFAULT, REPLICATED, DISTRIBUTED
Controllable:No
Description:DEFAULT: Use libMesh::ReplicatedMesh unless --distributed-mesh is specified on the command line REPLICATED: Always use libMesh::ReplicatedMesh DISTRIBUTED: Always use libMesh::DistributedMesh
skip_refine_when_use_splitTrueTrue to skip uniform refinements when using a pre-split mesh.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:True to skip uniform refinements when using a pre-split mesh.
xmax1Upper X Coordinate of the generated mesh
Default:1
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Upper X Coordinate of the generated mesh
xmin0Lower X Coordinate of the generated mesh
Default:0
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Lower X Coordinate of the generated mesh
ymax1Upper Y Coordinate of the generated mesh
Default:1
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Upper Y Coordinate of the generated mesh
ymin0Lower Y Coordinate of the generated mesh
Default:0
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Lower Y Coordinate of the generated mesh
zmax1Upper Z Coordinate of the generated mesh
Default:1
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Upper Z Coordinate of the generated mesh
zmin0Lower Z Coordinate of the generated mesh
Default:0
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Lower Z Coordinate of the generated mesh

Optional Parameters

alpha_rotationThe number of degrees that the domain should be alpha-rotated using the Euler angle ZXZ convention from https://en.wikipedia.org/wiki/Euler_angles#Rotation_matrix in order to align with a canonical physical space of your choosing.
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The number of degrees that the domain should be alpha-rotated using the Euler angle ZXZ convention from https://en.wikipedia.org/wiki/Euler_angles#Rotation_matrix in order to align with a canonical physical space of your choosing.
beta_rotationThe number of degrees that the domain should be beta-rotated using the Euler angle ZXZ convention from https://en.wikipedia.org/wiki/Euler_angles#Rotation_matrix in order to align with a canonical physical space of your choosing.
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The number of degrees that the domain should be beta-rotated using the Euler angle ZXZ convention from https://en.wikipedia.org/wiki/Euler_angles#Rotation_matrix in order to align with a canonical physical space of your choosing.
gamma_rotationThe number of degrees that the domain should be gamma-rotated using the Euler angle ZXZ convention from https://en.wikipedia.org/wiki/Euler_angles#Rotation_matrix in order to align with a canonical physical space of your choosing.
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The number of degrees that the domain should be gamma-rotated using the Euler angle ZXZ convention from https://en.wikipedia.org/wiki/Euler_angles#Rotation_matrix in order to align with a canonical physical space of your choosing.
length_unitHow much distance one mesh length unit represents, e.g. 1 cm, 1 nm, 1 ft, 5inches
C++ Type:std::string
Unit:(no unit assumed)
Controllable:No
Description:How much distance one mesh length unit represents, e.g. 1 cm, 1 nm, 1 ft, 5inches
up_directionSpecify what axis corresponds to the up direction in physical space (the opposite of the gravity vector if you will). If this parameter is provided, we will perform a single 90 degree rotation of the domain--if the provided axis is 'x' or 'z', we will not rotate if the axis is 'y'--such that a point which was on the provided axis will now lie on the y-axis, e.g. the y-axis is our canonical up direction. If you want finer grained control than this, please use the 'alpha_rotation', 'beta_rotation', and 'gamma_rotation' parameters.
C++ Type:MooseEnum
Unit:(no unit assumed)
Options:X, Y, Z
Controllable:No
Description:Specify what axis corresponds to the up direction in physical space (the opposite of the gravity vector if you will). If this parameter is provided, we will perform a single 90 degree rotation of the domain--if the provided axis is 'x' or 'z', we will not rotate if the axis is 'y'--such that a point which was on the provided axis will now lie on the y-axis, e.g. the y-axis is our canonical up direction. If you want finer grained control than this, please use the 'alpha_rotation', 'beta_rotation', and 'gamma_rotation' parameters.

Transformations Relative To Parent Application Frame Of Reference Parameters

coord_typeXYZType of the coordinate system per block param
Default:XYZ
C++ Type:MultiMooseEnum
Unit:(no unit assumed)
Options:XYZ, RZ, RSPHERICAL
Controllable:No
Description:Type of the coordinate system per block param
rz_coord_axisYThe rotation axis (X | Y) for axisymmetric coordinates
Default:Y
C++ Type:MooseEnum
Unit:(no unit assumed)
Options:X, Y
Controllable:No
Description:The rotation axis (X | Y) for axisymmetric coordinates
rz_coord_blocksBlocks using general axisymmetric coordinate systems
C++ Type:std::vector<SubdomainName>
Unit:(no unit assumed)
Controllable:No
Description:Blocks using general axisymmetric coordinate systems
rz_coord_directionsAxis directions for each block in 'rz_coord_blocks'
C++ Type:std::vector<libMesh::VectorValue<double>>
Unit:(no unit assumed)
Controllable:No
Description:Axis directions for each block in 'rz_coord_blocks'
rz_coord_originsAxis origin points for each block in 'rz_coord_blocks'
C++ Type:std::vector<libMesh::Point>
Unit:(no unit assumed)
Controllable:No
Description:Axis origin points for each block in 'rz_coord_blocks'

Coordinate System Parameters

centroid_partitioner_directionSpecifies the sort direction if using the centroid partitioner. Available options: x, y, z, radial
C++ Type:MooseEnum
Unit:(no unit assumed)
Options:x, y, z, radial
Controllable:No
Description:Specifies the sort direction if using the centroid partitioner. Available options: x, y, z, radial
partitionerdefaultSpecifies a mesh partitioner to use when splitting the mesh for a parallel computation.
Default:default
C++ Type:MooseEnum
Unit:(no unit assumed)
Options:default, metis, parmetis, linear, centroid, hilbert_sfc, morton_sfc
Controllable:No
Description:Specifies a mesh partitioner to use when splitting the mesh for a parallel computation.

Partitioning Parameters

construct_node_list_from_side_listTrueWhether or not to generate nodesets from the sidesets (usually a good idea).
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Whether or not to generate nodesets from the sidesets (usually a good idea).
control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Set the enabled status of the MooseObject.
nemesisFalseIf nemesis=true and file=foo.e, actually reads foo.e.N.0, foo.e.N.1, ... foo.e.N.N-1, where N = # CPUs, with NemesisIO.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:If nemesis=true and file=foo.e, actually reads foo.e.N.0, foo.e.N.1, ... foo.e.N.N-1, where N = # CPUs, with NemesisIO.
patch_size40The number of nodes to consider in the NearestNode neighborhood.
Default:40
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:The number of nodes to consider in the NearestNode neighborhood.
patch_update_strategyneverHow often to update the geometric search 'patch'. The default is to never update it (which is the most efficient but could be a problem with lots of relative motion). 'always' will update the patch for all secondary nodes at the beginning of every timestep which might be time consuming. 'auto' will attempt to determine at the start of which timesteps the patch for all secondary nodes needs to be updated automatically.'iteration' updates the patch at every nonlinear iteration for a subset of secondary nodes for which penetration is not detected. If there can be substantial relative motion between the primary and secondary surfaces during the nonlinear iterations within a timestep, it is advisable to use 'iteration' option to ensure accurate contact detection.
Default:never
C++ Type:MooseEnum
Unit:(no unit assumed)
Options:never, always, auto, iteration
Controllable:No
Description:How often to update the geometric search 'patch'. The default is to never update it (which is the most efficient but could be a problem with lots of relative motion). 'always' will update the patch for all secondary nodes at the beginning of every timestep which might be time consuming. 'auto' will attempt to determine at the start of which timesteps the patch for all secondary nodes needs to be updated automatically.'iteration' updates the patch at every nonlinear iteration for a subset of secondary nodes for which penetration is not detected. If there can be substantial relative motion between the primary and secondary surfaces during the nonlinear iterations within a timestep, it is advisable to use 'iteration' option to ensure accurate contact detection.

Advanced Parameters

(moose/test/tests/kernels/ad_mat_diffusion/ad_2d_steady_state.i)

# This test solves a 2D steady state heat equation
# The error is found by comparing to the analytical solution

# Note that the thermal conductivity, specific heat, and density in this problem
# Are set to 1, and need to be changed to the constants of the material being
# Analyzed

[Mesh]
  type = GeneratedMesh
  dim = 2
  nx = 30
  ny = 30
  xmax = 2
  ymax = 2
[]

[Variables]
  [./T]
  [../]
[]

[Kernels]
  [./HeatDiff]
    type = ADMatDiffusion
    variable = T
    diffusivity = diffusivity
  [../]
[]

[BCs]
  [./zero]
    type = DirichletBC
    variable = T
    boundary = 'left right bottom'
    value = 0
  [../]
  [./top]
    type = ADFunctionDirichletBC
    variable = T
    boundary = top
    function = '10*sin(pi*x*0.5)'
  [../]
[]

[Materials]
  [./k]
    type = ADGenericConstantMaterial
    prop_names = diffusivity
    prop_values = 1
  [../]
[]


[Postprocessors]
  [./nodal_error]
    type = NodalL2Error
    function = '10/(sinh(pi))*sin(pi*x*0.5)*sinh(pi*y*0.5)'
    variable = T
    outputs = console
  [../]
  [./elemental_error]
    type = ElementL2Error
    function = '10/(sinh(pi))*sin(pi*x*0.5)*sinh(pi*y*0.5)'
    variable = T
    outputs = console
  [../]
[]

[Executioner]
  type = Steady
[]

[Outputs]
  exodus = true
[]

Description
Example Syntax
Input Parameters