- inner_radiusThe size of the inner circle.
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The size of the inner circle.
- nodes_per_ringNumber of nodes on each ring.
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:Number of nodes on each ring.
- num_ringsThe number of rings.
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:The number of rings.
- outer_radiusThe size of the outer circle. Logically, it has to be greater than inner_radius
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The size of the outer circle. Logically, it has to be greater than inner_radius
SpiralAnnularMesh
This mesh is derived from MooseMesh. It has an annular shape, and nodes are located on different concentric rings between the inner and outer circles. The elements are triangular.
Here are the required parameters :
inner_radiusouter_radiusnodes_per_ringnum_rings
Given all these parameters, the radial bias will be computed automatically.
It is also possible to specify if you want a second-order Mesh : TRI3 elements will become TRI6 elements. To do that, simply change the use_tri6 parameter to true.
Example Input File
For example, with the following input file :
[Mesh]
type = SpiralAnnularMesh
use_tri6 = true
inner_radius = 1
nodes_per_ring = 18
outer_radius = 10
num_rings = 10
[]
The resulting mesh looks like this :
Further SpiralAnnularMesh Documentation
Input Parameters
- add_sideset_idsThe listed sideset ids will be assumed valid for the mesh. This permits setting up boundary restrictions for sidesets initially containing no sides. Names for this sidesets may be provided using add_sideset_names. In this case this list and add_sideset_names must contain the same number of items.
C++ Type:std::vector<short>
Unit:(no unit assumed)
Controllable:No
Description:The listed sideset ids will be assumed valid for the mesh. This permits setting up boundary restrictions for sidesets initially containing no sides. Names for this sidesets may be provided using add_sideset_names. In this case this list and add_sideset_names must contain the same number of items.
- add_sideset_namesThe listed sideset names will be assumed valid for the mesh. This permits setting up boundary restrictions for sidesets initially containing no sides. Ids for this sidesets may be provided using add_sideset_ids. In this case this list and add_sideset_ids must contain the same number of items.
C++ Type:std::vector<BoundaryName>
Unit:(no unit assumed)
Controllable:No
Description:The listed sideset names will be assumed valid for the mesh. This permits setting up boundary restrictions for sidesets initially containing no sides. Ids for this sidesets may be provided using add_sideset_ids. In this case this list and add_sideset_ids must contain the same number of items.
- add_subdomain_idsThe listed subdomain ids will be assumed valid for the mesh. This permits setting up subdomain restrictions for subdomains initially containing no elements, which can occur, for example, in additive manufacturing simulations which dynamically add and remove elements. Names for this subdomains may be provided using add_subdomain_names. In this case this list and add_subdomain_names must contain the same number of items.
C++ Type:std::vector<unsigned short>
Unit:(no unit assumed)
Controllable:No
Description:The listed subdomain ids will be assumed valid for the mesh. This permits setting up subdomain restrictions for subdomains initially containing no elements, which can occur, for example, in additive manufacturing simulations which dynamically add and remove elements. Names for this subdomains may be provided using add_subdomain_names. In this case this list and add_subdomain_names must contain the same number of items.
- add_subdomain_namesThe listed subdomain names will be assumed valid for the mesh. This permits setting up subdomain restrictions for subdomains initially containing no elements, which can occur, for example, in additive manufacturing simulations which dynamically add and remove elements. IDs for this subdomains may be provided using add_subdomain_ids. Otherwise IDs are automatically assigned. In case add_subdomain_ids is set too, both lists must contain the same number of items.
C++ Type:std::vector<SubdomainName>
Unit:(no unit assumed)
Controllable:No
Description:The listed subdomain names will be assumed valid for the mesh. This permits setting up subdomain restrictions for subdomains initially containing no elements, which can occur, for example, in additive manufacturing simulations which dynamically add and remove elements. IDs for this subdomains may be provided using add_subdomain_ids. Otherwise IDs are automatically assigned. In case add_subdomain_ids is set too, both lists must contain the same number of items.
- allow_renumberingTrueIf allow_renumbering=false, node and element numbers are kept fixed until deletion
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:If allow_renumbering=false, node and element numbers are kept fixed until deletion
- build_all_side_lowerd_meshFalseTrue to build the lower-dimensional mesh for all sides.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:True to build the lower-dimensional mesh for all sides.
- coord_blockBlock IDs for the coordinate systems. If this parameter is specified, then it must encompass all the subdomains on the mesh.
C++ Type:std::vector<SubdomainName>
Unit:(no unit assumed)
Controllable:No
Description:Block IDs for the coordinate systems. If this parameter is specified, then it must encompass all the subdomains on the mesh.
- cylinder_bid1The boundary id to use for the cylinder (inner circle)
Default:1
C++ Type:short
Unit:(no unit assumed)
Controllable:No
Description:The boundary id to use for the cylinder (inner circle)
- exterior_bid2The boundary id to use for the exterior (outer circle)
Default:2
C++ Type:short
Unit:(no unit assumed)
Controllable:No
Description:The boundary id to use for the exterior (outer circle)
- ghosting_patch_sizeThe number of nearest neighbors considered for ghosting purposes when 'iteration' patch update strategy is used. Default is 5 * patch_size.
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:The number of nearest neighbors considered for ghosting purposes when 'iteration' patch update strategy is used. Default is 5 * patch_size.
- initial_delta_rWidth of the initial layer of elements around the cylinder.This number should be approximately 2 * pi * inner_radius / nodes_per_ring to ensure that the initial layer of elements is almost equilateral
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Width of the initial layer of elements around the cylinder.This number should be approximately 2 * pi * inner_radius / nodes_per_ring to ensure that the initial layer of elements is almost equilateral
- max_leaf_size10The maximum number of points in each leaf of the KDTree used in the nearest neighbor search. As the leaf size becomes larger,KDTree construction becomes faster but the nearest neighbor searchbecomes slower.
Default:10
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:The maximum number of points in each leaf of the KDTree used in the nearest neighbor search. As the leaf size becomes larger,KDTree construction becomes faster but the nearest neighbor searchbecomes slower.
- parallel_typeDEFAULTDEFAULT: Use libMesh::ReplicatedMesh unless --distributed-mesh is specified on the command line REPLICATED: Always use libMesh::ReplicatedMesh DISTRIBUTED: Always use libMesh::DistributedMesh
Default:DEFAULT
C++ Type:MooseEnum
Unit:(no unit assumed)
Controllable:No
Description:DEFAULT: Use libMesh::ReplicatedMesh unless --distributed-mesh is specified on the command line REPLICATED: Always use libMesh::ReplicatedMesh DISTRIBUTED: Always use libMesh::DistributedMesh
- skip_refine_when_use_splitTrueTrue to skip uniform refinements when using a pre-split mesh.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:True to skip uniform refinements when using a pre-split mesh.
- use_tri6FalseGenerate mesh of TRI6 elements instead of TRI3 elements.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Generate mesh of TRI6 elements instead of TRI3 elements.
Optional Parameters
- alpha_rotationThe number of degrees that the domain should be alpha-rotated using the Euler angle ZXZ convention from https://en.wikipedia.org/wiki/Euler_angles#Rotation_matrix in order to align with a canonical physical space of your choosing.
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The number of degrees that the domain should be alpha-rotated using the Euler angle ZXZ convention from https://en.wikipedia.org/wiki/Euler_angles#Rotation_matrix in order to align with a canonical physical space of your choosing.
- beta_rotationThe number of degrees that the domain should be beta-rotated using the Euler angle ZXZ convention from https://en.wikipedia.org/wiki/Euler_angles#Rotation_matrix in order to align with a canonical physical space of your choosing.
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The number of degrees that the domain should be beta-rotated using the Euler angle ZXZ convention from https://en.wikipedia.org/wiki/Euler_angles#Rotation_matrix in order to align with a canonical physical space of your choosing.
- gamma_rotationThe number of degrees that the domain should be gamma-rotated using the Euler angle ZXZ convention from https://en.wikipedia.org/wiki/Euler_angles#Rotation_matrix in order to align with a canonical physical space of your choosing.
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The number of degrees that the domain should be gamma-rotated using the Euler angle ZXZ convention from https://en.wikipedia.org/wiki/Euler_angles#Rotation_matrix in order to align with a canonical physical space of your choosing.
- length_unitHow much distance one mesh length unit represents, e.g. 1 cm, 1 nm, 1 ft, 5inches
C++ Type:std::string
Unit:(no unit assumed)
Controllable:No
Description:How much distance one mesh length unit represents, e.g. 1 cm, 1 nm, 1 ft, 5inches
- up_directionSpecify what axis corresponds to the up direction in physical space (the opposite of the gravity vector if you will). If this parameter is provided, we will perform a single 90 degree rotation of the domain--if the provided axis is 'x' or 'z', we will not rotate if the axis is 'y'--such that a point which was on the provided axis will now lie on the y-axis, e.g. the y-axis is our canonical up direction. If you want finer grained control than this, please use the 'alpha_rotation', 'beta_rotation', and 'gamma_rotation' parameters.
C++ Type:MooseEnum
Unit:(no unit assumed)
Controllable:No
Description:Specify what axis corresponds to the up direction in physical space (the opposite of the gravity vector if you will). If this parameter is provided, we will perform a single 90 degree rotation of the domain--if the provided axis is 'x' or 'z', we will not rotate if the axis is 'y'--such that a point which was on the provided axis will now lie on the y-axis, e.g. the y-axis is our canonical up direction. If you want finer grained control than this, please use the 'alpha_rotation', 'beta_rotation', and 'gamma_rotation' parameters.
Transformations Relative To Parent Application Frame Of Reference Parameters
- coord_typeXYZType of the coordinate system per block param
Default:XYZ
C++ Type:MultiMooseEnum
Unit:(no unit assumed)
Controllable:No
Description:Type of the coordinate system per block param
- rz_coord_axisYThe rotation axis (X | Y) for axisymmetric coordinates
Default:Y
C++ Type:MooseEnum
Unit:(no unit assumed)
Controllable:No
Description:The rotation axis (X | Y) for axisymmetric coordinates
- rz_coord_blocksBlocks using general axisymmetric coordinate systems
C++ Type:std::vector<SubdomainName>
Unit:(no unit assumed)
Controllable:No
Description:Blocks using general axisymmetric coordinate systems
- rz_coord_directionsAxis directions for each block in 'rz_coord_blocks'
C++ Type:std::vector<libMesh::VectorValue<double>>
Unit:(no unit assumed)
Controllable:No
Description:Axis directions for each block in 'rz_coord_blocks'
- rz_coord_originsAxis origin points for each block in 'rz_coord_blocks'
C++ Type:std::vector<libMesh::Point>
Unit:(no unit assumed)
Controllable:No
Description:Axis origin points for each block in 'rz_coord_blocks'
Coordinate System Parameters
- centroid_partitioner_directionSpecifies the sort direction if using the centroid partitioner. Available options: x, y, z, radial
C++ Type:MooseEnum
Unit:(no unit assumed)
Controllable:No
Description:Specifies the sort direction if using the centroid partitioner. Available options: x, y, z, radial
- partitionerdefaultSpecifies a mesh partitioner to use when splitting the mesh for a parallel computation.
Default:default
C++ Type:MooseEnum
Unit:(no unit assumed)
Controllable:No
Description:Specifies a mesh partitioner to use when splitting the mesh for a parallel computation.
Partitioning Parameters
- construct_node_list_from_side_listTrueWhether or not to generate nodesets from the sidesets (usually a good idea).
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Whether or not to generate nodesets from the sidesets (usually a good idea).
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- dim1This is only required for certain mesh formats where the dimension of the mesh cannot be autodetected. In particular you must supply this for GMSH meshes. Note: This is completely ignored for ExodusII meshes!
Default:1
C++ Type:MooseEnum
Unit:(no unit assumed)
Controllable:No
Description:This is only required for certain mesh formats where the dimension of the mesh cannot be autodetected. In particular you must supply this for GMSH meshes. Note: This is completely ignored for ExodusII meshes!
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Set the enabled status of the MooseObject.
- nemesisFalseIf nemesis=true and file=foo.e, actually reads foo.e.N.0, foo.e.N.1, ... foo.e.N.N-1, where N = # CPUs, with NemesisIO.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:If nemesis=true and file=foo.e, actually reads foo.e.N.0, foo.e.N.1, ... foo.e.N.N-1, where N = # CPUs, with NemesisIO.
- patch_size40The number of nodes to consider in the NearestNode neighborhood.
Default:40
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:The number of nodes to consider in the NearestNode neighborhood.
- patch_update_strategyneverHow often to update the geometric search 'patch'. The default is to never update it (which is the most efficient but could be a problem with lots of relative motion). 'always' will update the patch for all secondary nodes at the beginning of every timestep which might be time consuming. 'auto' will attempt to determine at the start of which timesteps the patch for all secondary nodes needs to be updated automatically.'iteration' updates the patch at every nonlinear iteration for a subset of secondary nodes for which penetration is not detected. If there can be substantial relative motion between the primary and secondary surfaces during the nonlinear iterations within a timestep, it is advisable to use 'iteration' option to ensure accurate contact detection.
Default:never
C++ Type:MooseEnum
Unit:(no unit assumed)
Controllable:No
Description:How often to update the geometric search 'patch'. The default is to never update it (which is the most efficient but could be a problem with lots of relative motion). 'always' will update the patch for all secondary nodes at the beginning of every timestep which might be time consuming. 'auto' will attempt to determine at the start of which timesteps the patch for all secondary nodes needs to be updated automatically.'iteration' updates the patch at every nonlinear iteration for a subset of secondary nodes for which penetration is not detected. If there can be substantial relative motion between the primary and secondary surfaces during the nonlinear iterations within a timestep, it is advisable to use 'iteration' option to ensure accurate contact detection.