- use_displacedFalseEnable/disable the use of the displaced mesh for outputting
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Enable/disable the use of the displaced mesh for outputting
MaterialPropertyDebugOutput
Debug output object for displaying material property information.
Overview
The MaterialPropertyDebugOutput object is, as the name suggests, designed to write out material property information for debugging purposes. Please refer to the Debug System for more information.
Input Parameters
- additional_execute_onThe list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
C++ Type:ExecFlagEnum
Unit:(no unit assumed)
Controllable:No
Description:The list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
- execute_onINITIALThe list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
Default:INITIAL
C++ Type:ExecFlagEnum
Unit:(no unit assumed)
Controllable:No
Description:The list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
Execution Scheduling Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:Yes
Description:Set the enabled status of the MooseObject.
Advanced Parameters
- end_stepTime step at which this output object stop operating
C++ Type:int
Unit:(no unit assumed)
Controllable:No
Description:Time step at which this output object stop operating
- end_timeTime at which this output object stop operating
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Time at which this output object stop operating
- min_simulation_time_interval0The minimum simulation time between output steps
Default:0
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The minimum simulation time between output steps
- simulation_time_interval1.79769e+308The target simulation time interval (in seconds) at which to output
Default:1.79769e+308
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The target simulation time interval (in seconds) at which to output
- start_stepTime step at which this output object begins to operate
C++ Type:int
Unit:(no unit assumed)
Controllable:No
Description:Time step at which this output object begins to operate
- start_timeTime at which this output object begins to operate
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Time at which this output object begins to operate
- sync_onlyFalseOnly export results at sync times
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Only export results at sync times
- sync_timesTimes at which the output and solution is forced to occur
C++ Type:std::vector<double>
Unit:(no unit assumed)
Controllable:No
Description:Times at which the output and solution is forced to occur
- sync_times_objectTimes object providing the times at which the output and solution is forced to occur
C++ Type:TimesName
Unit:(no unit assumed)
Controllable:No
Description:Times object providing the times at which the output and solution is forced to occur
- time_step_interval1The interval (number of time steps) at which output occurs. Unless explicitly set, the default value of this parameter is set to infinity if the wall_time_interval is explicitly set.
Default:1
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:The interval (number of time steps) at which output occurs. Unless explicitly set, the default value of this parameter is set to infinity if the wall_time_interval is explicitly set.
- time_tolerance1e-14Time tolerance utilized checking start and end times
Default:1e-14
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Time tolerance utilized checking start and end times
- wall_time_interval1.79769e+308The target wall time interval (in seconds) at which to output
Default:1.79769e+308
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The target wall time interval (in seconds) at which to output