- use_displacedFalseEnable/disable the use of the displaced mesh for outputting
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Enable/disable the use of the displaced mesh for outputting
- write_hdf5FalseEnables HDF5 output format for Nemesis files.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Enables HDF5 output format for Nemesis files.
Nemesis
Object for output data in the Nemesis (parallel ExodusII) format.
Overview
The Nemesis output is the parallel version of the ExodusII format, which should generally be used when running a simulation with a distributed mesh. See Mesh System for more information.
Input Parameters
- additional_execute_onThe list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
C++ Type:ExecFlagEnum
Unit:(no unit assumed)
Controllable:No
Description:The list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
- execute_onINITIAL TIMESTEP_ENDThe list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
Default:INITIAL TIMESTEP_END
C++ Type:ExecFlagEnum
Unit:(no unit assumed)
Controllable:No
Description:The list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
- output_linearFalseSpecifies whether output occurs on each PETSc linear residual evaluation
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Specifies whether output occurs on each PETSc linear residual evaluation
- output_nonlinearFalseSpecifies whether output occurs on each PETSc nonlinear residual evaluation
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Specifies whether output occurs on each PETSc nonlinear residual evaluation
Execution Scheduling Parameters
- append_dateFalseWhen true the date and time are appended to the output filename.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:When true the date and time are appended to the output filename.
- append_date_formatThe format of the date/time to append, if not given UTC format is used (see http://www.cplusplus.com/reference/ctime/strftime).
C++ Type:std::string
Unit:(no unit assumed)
Controllable:No
Description:The format of the date/time to append, if not given UTC format is used (see http://www.cplusplus.com/reference/ctime/strftime).
- file_baseThe desired solution output name without an extension. If not provided, MOOSE sets it with Outputs/file_base when available. Otherwise, MOOSE uses input file name and this object name for a master input or uses master file_base, the subapp name and this object name for a subapp input to set it.
C++ Type:std::string
Unit:(no unit assumed)
Controllable:No
Description:The desired solution output name without an extension. If not provided, MOOSE sets it with Outputs/file_base when available. Otherwise, MOOSE uses input file name and this object name for a master input or uses master file_base, the subapp name and this object name for a subapp input to set it.
- output_if_base_containsIf this is supplied then output will only be done in the case that the output base contains one of these strings. This is helpful in outputting only a subset of outputs when using MultiApps.
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:If this is supplied then output will only be done in the case that the output base contains one of these strings. This is helpful in outputting only a subset of outputs when using MultiApps.
- padding4The number of digits for the extension suffix (e.g., out.e-s002)
Default:4
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:The number of digits for the extension suffix (e.g., out.e-s002)
File Name Customization Parameters
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:Yes
Description:Set the enabled status of the MooseObject.
Advanced Parameters
- end_stepTime step at which this output object stop operating
C++ Type:int
Unit:(no unit assumed)
Controllable:No
Description:Time step at which this output object stop operating
- end_timeTime at which this output object stop operating
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Time at which this output object stop operating
- min_simulation_time_interval0The minimum simulation time between output steps
Default:0
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The minimum simulation time between output steps
- simulation_time_interval1.79769e+308The target simulation time interval (in seconds) at which to output
Default:1.79769e+308
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The target simulation time interval (in seconds) at which to output
- start_stepTime step at which this output object begins to operate
C++ Type:int
Unit:(no unit assumed)
Controllable:No
Description:Time step at which this output object begins to operate
- start_timeTime at which this output object begins to operate
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Time at which this output object begins to operate
- sync_onlyFalseOnly export results at sync times
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Only export results at sync times
- sync_timesTimes at which the output and solution is forced to occur
C++ Type:std::vector<double>
Unit:(no unit assumed)
Controllable:No
Description:Times at which the output and solution is forced to occur
- sync_times_objectTimes object providing the times at which the output and solution is forced to occur
C++ Type:TimesName
Unit:(no unit assumed)
Controllable:No
Description:Times object providing the times at which the output and solution is forced to occur
- time_step_interval1The interval (number of time steps) at which output occurs. Unless explicitly set, the default value of this parameter is set to infinity if the wall_time_interval is explicitly set.
Default:1
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:The interval (number of time steps) at which output occurs. Unless explicitly set, the default value of this parameter is set to infinity if the wall_time_interval is explicitly set.
- time_tolerance1e-14Time tolerance utilized checking start and end times
Default:1e-14
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Time tolerance utilized checking start and end times
- wall_time_interval1.79769e+308The target wall time interval (in seconds) at which to output
Default:1.79769e+308
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:The target wall time interval (in seconds) at which to output
Timing And Frequency Of Output Parameters
- execute_input_onEnable/disable the output of the input file
C++ Type:ExecFlagEnum
Unit:(no unit assumed)
Controllable:No
Description:Enable/disable the output of the input file
- execute_postprocessors_onControl of when postprocessors are output
C++ Type:ExecFlagEnum
Unit:(no unit assumed)
Controllable:No
Description:Control of when postprocessors are output
- execute_scalars_onControl the output of scalar variables
C++ Type:ExecFlagEnum
Unit:(no unit assumed)
Controllable:No
Description:Control the output of scalar variables
- hideA list of the variables and postprocessors that should NOT be output to the Exodus file (may include Variables, ScalarVariables, and Postprocessor names).
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:A list of the variables and postprocessors that should NOT be output to the Exodus file (may include Variables, ScalarVariables, and Postprocessor names).
- showA list of the variables and postprocessors that should be output to the Exodus file (may include Variables, ScalarVariables, and Postprocessor names).
C++ Type:std::vector<VariableName>
Unit:(no unit assumed)
Controllable:No
Description:A list of the variables and postprocessors that should be output to the Exodus file (may include Variables, ScalarVariables, and Postprocessor names).
Selection/Restriction Of Output Parameters
- linear_residual_dt_divisor1000Number of divisions applied to time step when outputting linear residuals
Default:1000
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Number of divisions applied to time step when outputting linear residuals
- linear_residual_end_timeSpecifies an end time to begin output on each linear residual evaluation
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Specifies an end time to begin output on each linear residual evaluation
- linear_residual_start_timeSpecifies a start time to begin output on each linear residual evaluation
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Specifies a start time to begin output on each linear residual evaluation
- nonlinear_residual_dt_divisor1000Number of divisions applied to time step when outputting non-linear residuals
Default:1000
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Number of divisions applied to time step when outputting non-linear residuals
- nonlinear_residual_end_timeSpecifies an end time to begin output on each nonlinear residual evaluation
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Specifies an end time to begin output on each nonlinear residual evaluation
- nonlinear_residual_start_timeSpecifies a start time to begin output on each nonlinear residual evaluation
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Specifies a start time to begin output on each nonlinear residual evaluation
Petsc Linear/Nonlinear Output Parameters
- postprocessors_as_reportersFalseOutput Postprocessors values as Reporter values.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Output Postprocessors values as Reporter values.
- vectorpostprocessors_as_reportersFalseOutput VectorsPostprocessors vectors as Reporter values.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Output VectorsPostprocessors vectors as Reporter values.