InterfaceQpMaterialPropertyRealUO

IMPORTANT NOTES * This userobject only support multiprocessing. Threading is not supported at this time *

Description !syntax description /UserObjects/InterfaceQpMaterialPropertyRealUO

InterfaceQpMaterialPropertyRealUO is a user object computing and storing average real material property values, rates, or increments across an interface for each quadrature point. The kind of average value are the one available in InterfaceValueTools. The value type stored by this userobject is selected via the value_type input parameter. For example to get both the material property value and material property rate the user must add two separate user objects in the input file.

The InterfaceQpMaterialPropertyRealUO can provide two types of values to other MOOSE systems:

a qp value by calling getQpValue
an element side average value by calling getSideAverageValue

The stored value can be converted into an AuxVariable by using InterfaceValueUserObjectAux AuxKernel.

Example Input File Syntax

[UserObjects]
  [./interface_value_uo]
    type = InterfaceQpMaterialPropertyRealUO
    property = diffusivity
    property_neighbor = diffusivity
    boundary = 'primary0_interface'
    execute_on = 'INITIAL LINEAR NONLINEAR TIMESTEP_BEGIN TIMESTEP_END FINAL'
    interface_value_type = average
  [../]
  [./interface_value_rate_uo]
    type = InterfaceQpMaterialPropertyRealUO
    property = diffusivity
    property_neighbor = diffusivity
    boundary = 'primary0_interface'
    execute_on = 'INITIAL LINEAR NONLINEAR TIMESTEP_BEGIN TIMESTEP_END FINAL'
    interface_value_type = average
    value_type = rate
  [../]
  [./interface_value_increment_uo]
    type = InterfaceQpMaterialPropertyRealUO
    property = diffusivity
    property_neighbor = diffusivity
    boundary = 'primary0_interface'
    execute_on = 'INITIAL LINEAR NONLINEAR TIMESTEP_BEGIN TIMESTEP_END FINAL'
    interface_value_type = average
    value_type = increment
  [../]
[]

Input Parameters

boundaryThe list of boundary IDs from the mesh where this object applies
C++ Type:std::vector<BoundaryName>
Unit:(no unit assumed)
Controllable:No
Description:The list of boundary IDs from the mesh where this object applies
propertyThe material property name
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:The material property name

Required Parameters

execute_onINITIAL TIMESTEP_ENDThe list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
Default:INITIAL TIMESTEP_END
C++ Type:ExecFlagEnum
Unit:(no unit assumed)
Options:NONE, INITIAL, LINEAR, NONLINEAR_CONVERGENCE, NONLINEAR, POSTCHECK, TIMESTEP_END, TIMESTEP_BEGIN, MULTIAPP_FIXED_POINT_END, MULTIAPP_FIXED_POINT_BEGIN, FINAL, CUSTOM
Controllable:No
Description:The list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
interface_value_typeaverageType of scalar output
Default:average
C++ Type:MooseEnum
Unit:(no unit assumed)
Options:average, jump_primary_minus_secondary, jump_secondary_minus_primary, jump_abs, primary, secondary
Controllable:No
Description:Type of scalar output
prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
property_neighborThe neighbor material property name
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:The neighbor material property name
use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
value_typevalueType of value to compute and store
Default:value
C++ Type:MooseEnum
Unit:(no unit assumed)
Options:value, rate, increment
Controllable:No
Description:Type of value to compute and store

Optional Parameters

allow_duplicate_execution_on_initialFalseIn the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:In the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:Yes
Description:Set the enabled status of the MooseObject.
execution_order_group0Execution order groups are executed in increasing order (e.g., the lowest number is executed first). Note that negative group numbers may be used to execute groups before the default (0) group. Please refer to the user object documentation for ordering of user object execution within a group.
Default:0
C++ Type:int
Unit:(no unit assumed)
Controllable:No
Description:Execution order groups are executed in increasing order (e.g., the lowest number is executed first). Note that negative group numbers may be used to execute groups before the default (0) group. Please refer to the user object documentation for ordering of user object execution within a group.
force_postauxFalseForces the UserObject to be executed in POSTAUX
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Forces the UserObject to be executed in POSTAUX
force_preauxFalseForces the UserObject to be executed in PREAUX
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Forces the UserObject to be executed in PREAUX
force_preicFalseForces the UserObject to be executed in PREIC during initial setup
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Forces the UserObject to be executed in PREIC during initial setup
implicitTrueDetermines whether this object is calculated using an implicit or explicit form
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Determines whether this object is calculated using an implicit or explicit form
use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.

Advanced Parameters

(moose/test/tests/userobjects/interface_user_object/interface_mp_real_user_object_QP.i)

[Mesh]
  [gen]
    type = GeneratedMeshGenerator
    dim = 2
    nx = 2
    xmax = 2
    ny = 2
    ymax = 2
  []
  [./subdomain1]
    input = gen
    type = SubdomainBoundingBoxGenerator
    bottom_left = '0 0 0'
    top_right = '1 1 0'
    block_id = 1
  [../]
  [./primary0_interface]
    type = SideSetsBetweenSubdomainsGenerator
    input = subdomain1
    primary_block = '0'
    paired_block = '1'
    new_boundary = 'primary0_interface'
  [../]
  [./break_boundary]
    input = primary0_interface
    type = BreakBoundaryOnSubdomainGenerator
  [../]
[]

[Variables]
  [./u]
    order = FIRST
    family = LAGRANGE
    block = 0
  [../]

  [./v]
    order = FIRST
    family = LAGRANGE
    block = 1
  [../]
[]

[Kernels]
  [./diff_u]
    type = CoeffParamDiffusion
    variable = u
    D = 2
    block = 0
  [../]
  [./diff_v]
    type = CoeffParamDiffusion
    variable = v
    D = 4
    block = 1
  [../]
  [./source_u]
    type = BodyForce
    variable = u
    function = 0.1*t
  [../]
[]

[InterfaceKernels]
  [./primary0_interface]
    type = PenaltyInterfaceDiffusionDot
    variable = u
    neighbor_var = v
    boundary = primary0_interface
    penalty = 1e6
  [../]
[]

[BCs]
  [./u]
    type = VacuumBC
    variable = u
    boundary = 'left_to_0 bottom_to_0 right top'
  [../]
  [./v]
    type = VacuumBC
    variable = v
    boundary = 'left_to_1 bottom_to_1'
  [../]
[]

[Preconditioning]
  [./SMP]
    type = SMP
    full = TRUE
  [../]
[]

[Executioner]
  type = Transient
  solve_type = 'NEWTON'
  dt = 0.1
  num_steps = 3
  dtmin = 0.1
  line_search = none
[]

[Outputs]
  [./out]
    type = Exodus
    sync_only = true
    sync_times = '0.1 0.2 0.3'
    execute_on = 'TIMESTEP_END'
  []
[]

[UserObjects]
  [./interface_value_uo]
    type = InterfaceQpMaterialPropertyRealUO
    property = diffusivity
    property_neighbor = diffusivity
    boundary = 'primary0_interface'
    execute_on = 'INITIAL LINEAR NONLINEAR TIMESTEP_BEGIN TIMESTEP_END FINAL'
    interface_value_type = average
  [../]
  [./interface_value_rate_uo]
    type = InterfaceQpMaterialPropertyRealUO
    property = diffusivity
    property_neighbor = diffusivity
    boundary = 'primary0_interface'
    execute_on = 'INITIAL LINEAR NONLINEAR TIMESTEP_BEGIN TIMESTEP_END FINAL'
    interface_value_type = average
    value_type = rate
  [../]
  [./interface_value_increment_uo]
    type = InterfaceQpMaterialPropertyRealUO
    property = diffusivity
    property_neighbor = diffusivity
    boundary = 'primary0_interface'
    execute_on = 'INITIAL LINEAR NONLINEAR TIMESTEP_BEGIN TIMESTEP_END FINAL'
    interface_value_type = average
    value_type = increment
  [../]
[]

[Materials]
  [./stateful1]
    type = StatefulMaterial
    block = 0
    initial_diffusivity = 5
  [../]
  [./stateful2]
    type = StatefulMaterial
    block = 1
    initial_diffusivity = 2
  [../]
[]

[AuxKernels]
  [./interface_avg_value_aux]
    type = InterfaceValueUserObjectAux
    variable = avg
    boundary = 'primary0_interface'
    interface_uo_name = interface_value_uo
    execute_on = 'INITIAL LINEAR NONLINEAR TIMESTEP_BEGIN TIMESTEP_END FINAL'
  []
  [./interface_avg_value_rate_aux]
    type = InterfaceValueUserObjectAux
    variable = avg_rate
    boundary = 'primary0_interface'
    interface_uo_name = interface_value_rate_uo
    execute_on = 'INITIAL LINEAR NONLINEAR TIMESTEP_BEGIN TIMESTEP_END FINAL'
  []
  [./interface_avg_value_increment_aux]
    type = InterfaceValueUserObjectAux
    variable = avg_increment
    boundary = 'primary0_interface'
    interface_uo_name = interface_value_increment_uo
    execute_on = 'INITIAL LINEAR NONLINEAR TIMESTEP_BEGIN TIMESTEP_END FINAL'
  []
[]

[AuxVariables]
  [./avg]
    family = MONOMIAL
    order = CONSTANT
  []
  [./avg_rate]
    family = MONOMIAL
    order = CONSTANT
  []
  [./avg_increment]
    family = MONOMIAL
    order = CONSTANT
  []
[]

IMPORTANT NOTES * This userobject only support multiprocessing . Threading is not supported at this time *
Description ! syntax description / UserObjects / InterfaceQpMaterialPropertyRealUO
Example Input File Syntax
Input Parameters