- boundaryThe list of boundary IDs from the mesh where this object applies
C++ Type:std::vector<BoundaryName>
Unit:(no unit assumed)
Controllable:No
Description:The list of boundary IDs from the mesh where this object applies
- functorThe functor to be integrated. A functor is any of the following: a variable, a functor material property, a function, a post-processor, or a number.
C++ Type:MooseFunctorName
Unit:(no unit assumed)
Controllable:No
Description:The functor to be integrated. A functor is any of the following: a variable, a functor material property, a function, a post-processor, or a number.
NearestPointLayeredSideAverageFunctor
This object is the same as NearestPointLayeredSideAverage, but the layered average may be taken of any functor, not just a variable.
commentnote:Functor requirements
This object requires the ElemSideQpArg functor spatial argument to be implemented for the "functor" parameter.
Input Parameters
- blockThe list of block ids (SubdomainID) that this object will be applied
C++ Type:std::vector<SubdomainName>
Unit:(no unit assumed)
Controllable:No
Description:The list of block ids (SubdomainID) that this object will be applied
- execute_onTIMESTEP_ENDThe list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
Default:TIMESTEP_END
C++ Type:ExecFlagEnum
Unit:(no unit assumed)
Controllable:No
Description:The list of flag(s) indicating when this object should be executed. For a description of each flag, see https://mooseframework.inl.gov/source/interfaces/SetupInterface.html.
- layer_bounding_blockList of block ids (SubdomainID) that are used to determine the upper and lower geometric bounds for all layers. If this is not specified, the ids specified in 'block' are used for this purpose.
C++ Type:std::vector<SubdomainName>
Unit:(no unit assumed)
Controllable:No
Description:List of block ids (SubdomainID) that are used to determine the upper and lower geometric bounds for all layers. If this is not specified, the ids specified in 'block' are used for this purpose.
- prop_getter_suffixAn optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
C++ Type:MaterialPropertyName
Unit:(no unit assumed)
Controllable:No
Description:An optional suffix parameter that can be appended to any attempt to retrieve/get material properties. The suffix will be prepended with a '_' character.
- use_interpolated_stateFalseFor the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:For the old and older state use projected material properties interpolated at the quadrature points. To set up projection use the ProjectedStatefulMaterialStorageAction.
Optional Parameters
- allow_duplicate_execution_on_initialFalseIn the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:In the case where this UserObject is depended upon by an initial condition, allow it to be executed twice during the initial setup (once before the IC and again after mesh adaptivity (if applicable).
- control_tagsAdds user-defined labels for accessing object parameters via control logic.
C++ Type:std::vector<std::string>
Unit:(no unit assumed)
Controllable:No
Description:Adds user-defined labels for accessing object parameters via control logic.
- enableTrueSet the enabled status of the MooseObject.
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:Yes
Description:Set the enabled status of the MooseObject.
- execution_order_group0Execution order groups are executed in increasing order (e.g., the lowest number is executed first). Note that negative group numbers may be used to execute groups before the default (0) group. Please refer to the user object documentation for ordering of user object execution within a group.
Default:0
C++ Type:int
Unit:(no unit assumed)
Controllable:No
Description:Execution order groups are executed in increasing order (e.g., the lowest number is executed first). Note that negative group numbers may be used to execute groups before the default (0) group. Please refer to the user object documentation for ordering of user object execution within a group.
- force_postauxFalseForces the UserObject to be executed in POSTAUX
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Forces the UserObject to be executed in POSTAUX
- force_preauxFalseForces the UserObject to be executed in PREAUX
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Forces the UserObject to be executed in PREAUX
- force_preicFalseForces the UserObject to be executed in PREIC during initial setup
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Forces the UserObject to be executed in PREIC during initial setup
- use_displaced_meshFalseWhether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:Whether or not this object should use the displaced mesh for computation. Note that in the case this is true but no displacements are provided in the Mesh block the undisplaced mesh will still be used.
Advanced Parameters
- average_radius1When using 'average' sampling this is how the number of values both above and below the layer that will be averaged.
Default:1
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:When using 'average' sampling this is how the number of values both above and below the layer that will be averaged.
- cumulativeFalseWhen true the value in each layer is the sum of the values up to and including that layer
Default:False
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:When true the value in each layer is the sum of the values up to and including that layer
- positive_cumulative_directionTrueWhen 'cumulative' is true, whether the direction for summing the cumulative value is the positive direction or negative direction
Default:True
C++ Type:bool
Unit:(no unit assumed)
Controllable:No
Description:When 'cumulative' is true, whether the direction for summing the cumulative value is the positive direction or negative direction
- sample_typedirectHow to sample the layers. 'direct' means get the value of the layer the point falls in directly (or average if that layer has no value). 'interpolate' does a linear interpolation between the two closest layers. 'average' averages the two closest layers.
Default:direct
C++ Type:MooseEnum
Unit:(no unit assumed)
Controllable:No
Description:How to sample the layers. 'direct' means get the value of the layer the point falls in directly (or average if that layer has no value). 'interpolate' does a linear interpolation between the two closest layers. 'average' averages the two closest layers.
Value Sampling / Aggregating Parameters
- axiszThe axis around which the radius is determined
Default:z
C++ Type:MooseEnum
Unit:(no unit assumed)
Controllable:No
Description:The axis around which the radius is determined
- dist_normpointTo specify whether the distance is defined based on point or radius
Default:point
C++ Type:MooseEnum
Unit:(no unit assumed)
Controllable:No
Description:To specify whether the distance is defined based on point or radius
- pointsComputations will be lumped into values at these points.
C++ Type:std::vector<libMesh::Point>
Unit:(no unit assumed)
Controllable:No
Description:Computations will be lumped into values at these points.
- points_fileA filename that should be looked in for points. Each set of 3 values in that file will represent a Point. This and 'points' cannot be both supplied.
C++ Type:FileName
Unit:(no unit assumed)
Controllable:No
Description:A filename that should be looked in for points. Each set of 3 values in that file will represent a Point. This and 'points' cannot be both supplied.
Points And Distance To Points Parameters
- boundsThe 'bounding' positions of the layers i.e.: '0, 1.2, 3.7, 4.2' will mean 3 layers between those positions.
C++ Type:std::vector<double>
Unit:(no unit assumed)
Controllable:No
Description:The 'bounding' positions of the layers i.e.: '0, 1.2, 3.7, 4.2' will mean 3 layers between those positions.
- directionThe direction of the layers.
C++ Type:MooseEnum
Unit:(no unit assumed)
Controllable:No
Description:The direction of the layers.
- direction_maxMaximum coordinate along 'direction' that bounds the layers
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Maximum coordinate along 'direction' that bounds the layers
- direction_minMinimum coordinate along 'direction' that bounds the layers
C++ Type:double
Unit:(no unit assumed)
Controllable:No
Description:Minimum coordinate along 'direction' that bounds the layers
- num_layersThe number of layers.
C++ Type:unsigned int
Unit:(no unit assumed)
Controllable:No
Description:The number of layers.